|
|
2024-2025 Undergraduate Catalog
Mechanical Engineering, B.S.E.
|
|
Department Website
The field of mechanical engineering offers career opportunities in areas such as design, analysis, test development, research and the manufacturing of various products. Oakland University’s mechanical engineering program provides students with a foundation in the fundamental concepts and principles associated with mechanics of solids, thermodynamics, fluid and thermal energy, materials, manufacturing, design of mechanical systems, electrical circuits, computer programming and software utilization. A strong laboratory experience and the utilization of instrumentation and computer simulation tools are interwoven through the curriculum. The program also provides numerous engineering design experiences. The BSE in Mechanical Engineering program is accredited by the Engineering Accreditation Commission of ABET, https://www.abet.org, under the General Criteria and the Mechanical Engineering Program Criteria.In order to earn the degree of Bachelor of Science in Engineering with a major in mechanical engineering, students must complete a minimum of 128 credits and meet the following requirements:
|
Program educational objectives
- The objectives of the Mechanical Engineering program are to produce graduates, who three to five years after graduation, will:
- function successfully in engineering roles within the automotive and other global industries,
- engage in lifelong learning and pursue graduate study in mechanical engineering or other post-graduate education,
- contribute effectively and ethically to a modern, multidisciplinary workplace, and
- demonstrate effective communication, problem-solving and teamwork skills.
Schedule of Classes
Specific offerings for each semester may be found in the Schedule of Classes.
Requirements for the major in mechanical engineering, B.S.E.
General Education requirements
In order to graduate on-schedule without taking additional courses, it is highly recommended that students meet with an Undergraduate Academic Adviser concerning the selection of all of their general education courses.
Each candidate for an Oakland University baccalaureate will need to satisfactorily complete approved courses in each of the following areas: Foundations, Explorations, and Integration. For details, refer to the General Education Requirements section of the catalog. In order to satisfy both general education and other program requirements, in some of the general education areas students should select from the courses listed below:
Foundations:
- Writing Foundations - WRT 1060
- Formal Reasoning (satisfied by MTH 1554; see Mathematics and Sciences)
Explorations: One course from each of the seven Explorations areas:
- Arts
- Language and Culture
- Global Perspective
- Literature
- Natural Science and Technology (satisfied by EGR 2400 or EGR 2500; see Engineering Core)
- Social Science (satisfied by ECN 1500, ECN 2010 or ECN 2020; see Additional Major Requirements)
- Western Civilization (satisfied by PHL 1310; see Additional Major Requirements)
Integration:
- Knowledge Applications (satisfied by MTH 1555; see Mathematics and Sciences)
- Capstone (satisfied by ME 4999; see Required Professional Subjects)
U.S. Diversity:
- May be met by an approved course in the Explorations area
Writing Intensive:
- Writing Intensive in the Major (satisfied by ME 4999; see Required Professional Subjects)
- Writing Intensive in General Education (may be met by an approved course in the Explorations area)
Additional Major Requirements:
All mechanical engineering students must meet the following requirements. Courses from these selections can meet general education exploration areas above.
- Professional Ethics: PHL 1310 - Introduction to Ethics in Science and Engineering
- Economics: Choose one from ECN 1500, ECN 2010 or ECN 2020
In order to graduate on-schedule without taking additional courses, it is highly recommended that students meet with an SECS Undergraduate Academic Adviser concerning the selection of all of their general education courses.
Mathematics and Sciences
Students must complete at least 30 credits in the required math/science area. Students with fewer than 30 credit hours of math/science, for example due to transfers from another institution, must take additional courses to satisfy this requirement. Additional courses in math/science must be from the approved departmental list or by petition of exception.
Approved Math/Science Elective Options
Students majoring in mechanical engineering are advised to take MTH 2775 to broaden their knowledge of linear algebra. However, students who have an explicit interest in broadening their knowledge in a specific area of math or science should select an elective from the following approved course list:
Required Professional Subjects
Note
*ME 4998 requires approval of project proposal by the Mechanical Engineering Department. If taken in place of ME 4999 , it must be team-based and Capstone and Writing Intensive in the Major requirements must be approved via a General Education petition.
Professional Electives
Mechanical engineering students must complete at least 12 additional credits of 4000- or 5000-level ME, BE, ISE, or ECE designated courses (must have instructor’s permission to take 5000-level courses). At least 8 of these credits must have an ME designation. Students interested in broadening their knowledge in a specific area of mechanical engineering should elect sequences of courses as described in the specialized professional depth areas listed below:
1. Energy, Fluid and Thermal Systems depth area. Includes courses in the fluid and thermal energy transport area.
Recommended fundamental subjects
2. Computer-Aided Design depth area. Includes courses in the computer-aided design (CAD) and analysis area.
Recommended fundamental subjects
3. Automotive Engineering depth area. Includes courses with an automotive engineering emphasis area with two possible areas of specialty: automotive structures or internal combustion engines.
Recommended fundamental subjects: Automotive Structures Specialty
Recommended fundamental subjects: Internal Combustion Engines Specialty
4. Manufacturing Engineering depth area. This depth area includes courses in the manufacturing area.
Recommended fundamental subjects
5. Materials Engineering depth area. This depth area includes courses in the areas of basic and advanced materials, plastics and composites manufacturing
Recommended fundamental subjects
6. Nuclear Engineering depth area. This depth area includes courses in the nuclear engineering area.
Required fundamental subjects
Optional Specializations or Concentrations:
The Mechanical Engineering Department offers optional specializations/concentrations in Automotive Engineering, Manufacturing, Energy, and Electrified Propulsion to students interested in broadening their knowledge in a specific area of mechanical engineering and wishing an area of specialization in their degree. These specializations/concentrations are only applicable for students enrolled in the Bachelor of Science degree in Mechanical Engineering. The sequences of courses listed below for each specialization/concentration are taken to satisfy the professional electives requirement. Note that completing the Bachelor of Science degree in Mechanical Engineering with a specialization or concentration may require more than 128 credits. Students may earn only one specialization/concentration and the specialization/concentration must be completed as part of their degree. The specialization or concentration will be noted on the students’ transcript.
1. Automotive Engineering Specialization
The Automotive Engineering Specialization includes courses related to powertrain, vehicle dynamics, as well as systems integration as they relate to vehicle design.
See adviser for complete details on specialization.
Required fundamental subjects - 8 credits, choose two courses
Select at least 8 credits from the following
2. Manufacturing Specialization
The Manufacturing Specialization includes courses related to manufacturing processes for metals and plastics as well as manufacturing systems.
See adviser for complete details on specialization.
Fundamental subjects - 8 credits, choose two courses
Select at least additional 8 credits from the following
3. Energy Specialization
The Energy Specialization includes fundamental courses in energy systems as well as fundamental courses in the fluid and thermal sciences.
See adviser for complete details on specialization.
Required fundamental subjects - 8 credits, choose two courses
Select at least 8 credits from the following:
4. Electrified Propulsion Concentration
The Electrified Propulsion Concentration includes courses related to electric and hybrid-electric powertrain, driveline dynamics, controls, and systems integration as they relate to vehicle powertrain design.
See adviser for complete details on concentration.
Required fundamental subjects - 8 credits
Select at least 8 credits from the following
Major Standing
To enroll in 3000- or higher level courses and to become candidates for the degree of Bachelor of Science in Engineering with a major in Mechanical Engineering, students must gain major standing. An application for major standing should be submitted prior to intended enrollment in 3000- or higher level courses. Students can obtain the major standing form from the SECS Undergraduate Advising Website. At the time that major standing is approved, students with majors of Pre-Mechanical Engineering will have their major changed to Mechanical Engineering. Approval of both a major standing application and change of major to Mechanical Engineering is required prior to enrolling in any 3000- or higher-level courses.
To gain major standing in Mechanical Engineering, students must:
A) have an average GPA of 2.0 in the following mathematics and science courses: MTH 1554 , MTH 1555 , APM 2555 , CHM 1440 , PHY 1510 , PHY 1520 ;
B) have an average GPA of 2.0 in the following engineering core courses: EGR 1200 , EGR 1400 , EGR 2400 , EGR 2500 , EGR 2600 , EGR 2800 . Note that some mechanical engineering courses require a minimum grade of C in EGR 2500 or EGR 2800 ;
C) have no more than two grades below C in the required courses in A and B above;
D) have not attempted any course listed in A and B above more than three times; and
E) have not repeated more than three different courses listed in A and B. Courses in which a W (withdrawal) grade is recorded will not be counted.
Conditional major standing may be granted in the semester in which the student will complete the courses listed in A and B above.
Performance requirements
Satisfactory completion of the program requires a GPA of at least 2.0 within each course group: mathematics and sciences, engineering core, and professional courses (including required professional subjects and professional electives) and a grade of C or better in the senior design capstone course (ME 4999 or ME 4998). Within professional courses, at most two grades below C are permitted, at most two different courses may be repeated, and a total of three repeat attempts per course are permitted.
Sample mechanical engineering schedule
Students entering the School of Engineering and Computer Science with the required background may follow a schedule such as the one indicated below. However, students will need additional time to complete the program if they do not have the required background upon entrance to the program. Fall semester – 17 total credits
Winter semester – 16 total credits
Fall semester – 16 total credits
Winter semester – 16 total credits
Fall semester – 16 total credits
Winter semester – 15 total credits
Fall semester – 16 total credits
Winter semester – 16 total credits
|
|
|